ZAOS 12 PCS Self Watering Probes Stakes – Indoor Automatic Waterer System Irrigation Equipment Houseplant Spikes…

Description

How to use
1. Fill a bucket or a pot about 4 inches with water. Enough to submerge the probe
2. Take the cap with the tube off the “cone” piece of the probe
3. Submerge BOTH pieces in the water, completely. You should see bubbles come out
4. WHILE STILL UNDERWATER put the cap back on the cone piece
5. Cover the open end of the tube with a finger and remove the probe from water
6. Stick one piece a little bit into the soil of plant
7. Stick the open end of the tube into the BOTTOM of a water bottle or jug. It must be well submerged in the water

Issues you may have
1. Too much water
Move the water bottle/jug a bit lower in height relative to the cone part. This will increase resistance and slow the flow.
2. Not working at all
You did not (a) fully submerge both pieces in the water like in above steps or (b) the end of the tube is not low enough in the water jug. you cannot just stick it in the top or it will not work.
3. Probe waters too much
Just remove the cone from soil and stick only the tip into the soil. This will reduce the flow of water drawn from the probe.
4. The probe does not water at all
You did not (a) fully submerge both pieces in the water like in above steps, or (b) the end of the tube is not deep enough in the water.

This watering device is really automatic, and suitable for indoor and outdoor seeding and planting
Just put one side of the tube in a vase or bowl of water, and the other in plant to drip
Simple and effective tools parts drippers, don’t let your plants get too thirsty! Perfect plant waterers kit for vacations and when away
Cable Length: 700mm; Package Quantity: 12 Pcs stakes, before you use this product, please refer Product Description
Suitable for Most plants – Ideal for houseplants, potted plants, patio plants, hanging baskets and outdoor gardens.